#OPENVPN LOGS INSTALL#
#OPENVPN LOGS SOFTWARE#
#OPENVPN LOGS PASSWORD#

Uci add_list ='208.67.220.220'ДЇixed DNS on Wan interface, using Google DNS: uci set ='0' # this disable the DNS provided by DHCPДЇinally, you should commit UCI changes: uci commit

# now add the DNS, These are from OpenDNS: Uci del # Deletes the previous list of DNS if exist. I recommend the last option, you will use same DNS Server as the Streisand host, you probably should also check if on the Streisand host are configured Fixed DNS like ones from OpenDNS or Google, you could change this to use Defaults DNS on the Streisand host.ДЇixed DNS on Lan interface, Using OpenDNS: uci add_list _option='6,208.67.222.222,208.67.220.220'ДЇixed DNS on Lan interface, Using Google DNS: uci add_list _option='6,8.8.8.8,8.8.4.4'ДЇixed DNS on Wan interface, using OpenDNS: uci set ='0' # this disable the DNS provided by DHCP

Set up two script that use the DNS provided through the VPN Tunnel on the Streisand host (recommended).

Set up fixed DNS on Wan Interface (will replace the default DNS provided to the Router on Wan Port).

Set up fixed DNS on Lan Interface (only for Lan and Wifi Clients).

Use your Wan port default DNS (the one that uses the OpenWrt to resolve domains currently), you could leave as is then, but be aware that your DNS queries will be done through VPN and some ISP DNS Servers are configured to blocks connections attemps from outside their network.

DNS: There is a tricky part with this, you have to choose one of these:.

Uci set set Finally, you should commit UCI changes: Uci set set set set set set add_list enable forwarding from LAN to VPN:

Run UCI commands to configure as VPN Client:.

If you want to autostart OpenVPN at router startup (in some OpenWrt releases comes enabled by default): /etc/init.d/openvpn enable

#OPENVPN LOGS INSTALL#

Opkg install openvpn-openssl # brings openvpn kmod-tun liblzo zlib libopenssl (~1M)

Install OpenVPN (you need internet connection on the OpenWrt Router).

Important: Ensure that you have at least 1MB of free space en rootfs on your OpenWrt Device, depending on the OpenWrt version flashed you may need more or less space to set up everything, if you dont have space but you have a USB port on the Router you could use ExtRoot, or try to build a custom image, or even try to write a script to download openvpn to ram on every df -hДЇilesystem Size Used Available Use% Mounted on.

Now you should be able to ssh the OpenWrt Router ssh using the previously typed password.

#OPENVPN LOGS PASSWORD#

You can skip this if you already have a password and can connect using passwd You need to telnet 192.168.1.1 (OpenWrt Router) and set up a password using passwd.These instructions are for getting an OpenWrt Based Router working as OpenVPN Client (should work for LEDE, Gargoyle and another distributions).Д¬omputers connected to Lan Ports of the OpenWrt Router will navigate through the Internet connection of the OpenVPN Server (in this case the Streisand one previously set up) you need a working Router with OpenWrt based firmware flashed on it (LEDE or could also work) steps works well on Chaos Calmer 15.05 or 15.05.1.

#OPENVPN LOGS SOFTWARE#

These instructions should work for Streisand as well for others VPN providers (Streisand is a Software that automatically configures a VPS online server with OpenVPN and other VPN/Proxy Softwares in order to have a private VPN Server)

Openvpn logs